Claude DOZORME Laguiole LUX mammoth molar 12 cm DSC® damascus
Collector's knife with DSC® rose damascus stainless Damascus bladeThe handle scales of this elegant Laguiole model are crafted from fossilised mammoth molar, with a blue layer providing a striking accent. Mineral deposits bring out the beautiful pattern. The last great mammoths became extinct only 8,000 to 10,000 years ago.The colouring varies naturally. Today, mammoth ivory, molars and mammoth bones are found primarily on the Siberian Arctic coast. Export is only permitted following a scientific assessment and with the appropriate licence. However, mammoth ivory is not subject to the Convention on International Trade in Endangered Species and may be traded freely. The material’s beautiful structure and elegant lustre are unique. The blade and the knife’s handle have been finished by hand with fine filing work.The handle material itself is a real eye-catcher, but the icing on the cake of this exclusive knife is undoubtedly the Damascus blade. The DSC® STAINLESS stainless Damascus steel of the blade comes from Markus Balbach. The steel has a fine grain and impresses with its edge retention. It has a Rockwell hardness of approximately 62 HRC.You will receive the model shown. knife lenght open 21,5 cmblade 10 cmweight 108 gscales mammoth molarfinish shinyDSC® inox HRC62 Markus Bahlbach stainless steelchiseled plates delivered in a wooden box with leather pouch and zertificate100% made in France
Claude DOZORME Laguiole LUX maple burl 12 cm DSC® damascus
Collector's knife with DSC® rose damascus stainless Damascus bladeThe handle scales of this elegant Laguiole model are crafted from finely grained, stabilised maple burl, a green layer adds a beautiful accent. The bolster and handle of the knife have been finished by hand with exquisite filing.The handle material itself is a real eye-catcher, but the icing on the cake of this exclusive knife is undoubtedly the Damascus blade. The DSC® STAINLESS stainless Damascus steel of the blade comes from Markus Balbach. The steel has a fine grain and impresses with its edge retention. It has a Rockwell hardness of approximately 62 HRC.You will receive the model shown. knife lenght open 21,5 cmblade 10 cmweight 108 gscales maple burlfinish shinyDSC® inox HRC62 Markus Bahlbach stainless steelchiseled plates delivered in a wooden box with leather pouch and zertificate100% made in France
Claude DOZORME Laguiole LUX maple burl 12 cm DSC® damascus
Collector's knife with DSC® rose damascus stainless Damascus bladeThe handle scales of this elegant Laguiole model are crafted from finely grained, stabilised maple burl, a green layer adds a beautiful accent. The bolster and handle of the knife have been finished by hand with exquisite filing.The handle material itself is a real eye-catcher, but the icing on the cake of this exclusive knife is undoubtedly the Damascus blade. The DSC® STAINLESS stainless Damascus steel of the blade comes from Markus Balbach. The steel has a fine grain and impresses with its edge retention. It has a Rockwell hardness of approximately 62 HRC.You will receive the model shown. knife lenght open 21,5 cmblade 10 cmweight 108 gscales maple burlfinish shinyDSC® inox HRC62 Markus Bahlbach stainless steelchiseled plates delivered in a wooden box with leather pouch and zertificate100% made in France
Claude DOZORME Thiers RLT maple burl wood damascus blade
Exclusive Thiers RLT knife with a stainless damask bladeThe handle scales are crafted from stabilised maple burl. This elegant Thiers knife features a stainless damask blade made from DSC® STAINLESS steel by Markus Balbach.The stainless steel has a very fine grain structure and a Rockwell hardness of approximately 62 HRC. It impresses with its sharpness and edge retention.The blade action can be adjusted using a small key supplied with the knife. The extra-wide bolsters and the guard have been elaborately guilloché by hand. The finish of the Thiers knife is matt.knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales maple burlbolsters matblade steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingdelivered with certificate, leather sheath, wooden box100% made in France
Claude DOZORME Thiers RLT maple burl wood damascus blade
Exclusive Thiers RLT knife with a stainless damask bladeThe handle scales are crafted from stabilised maple burl. This elegant Thiers knife features a stainless damask blade made from DSC® STAINLESS steel by Markus Balbach.The stainless steel has a very fine grain structure and a Rockwell hardness of approximately 62 HRC. It impresses with its sharpness and edge retention.The blade action can be adjusted using a small key supplied with the knife. The extra-wide bolsters and the guard have been elaborately guilloché by hand. The finish of the Thiers knife is matt.knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales maple burlbolsters matblade steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingdelivered with certificate, leather sheath, wooden box100% made in France
Claude DOZORME Thiers RLT maple burl wood damascus blade
Exclusive Thiers RLT knife with a stainless damask bladeThe handle scales are crafted from stabilised maple burl. This elegant Thiers knife features a stainless damask blade made from DSC® STAINLESS steel by Markus Balbach.The stainless steel has a very fine grain structure and a Rockwell hardness of approximately 62 HRC. It impresses with its sharpness and edge retention.The blade action can be adjusted using a small key supplied with the knife. The extra-wide bolsters and the guard have been elaborately guilloché by hand. The finish of the Thiers knife is matt.knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales maple burlbolsters matblade steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingdelivered with certificate, leather sheath, wooden box100% made in France
MANU LAPLACE 1515 Drop carbon water brass & mokume gane damascus Damascus blade
This knife combines elegance and masterful craftsmanship. The Mokume Gane damask bolsters made of bronze, copper and brass creates a sophisticated contrast to the other elements of the design.Manu Laplace, not just a cutler, but an artist who lives his dream.In 2001 Manu Laplace began to combine tradition, craftsmanship, art and passion and created the legendary 1515® knife.The concept: tied to the Nordic form, in always identical construction, Manu Laplace lets his creative power and creativity flow into an infinite number of unique variations. Each knife is unique and highly recognizable.In the meantime, the artist and his brand 1515® have become a valued brand and a must-have among lovers and collectors worldwide. scales: Carbone with brass, Mokume Gane damascus bolstersblade: stainless damascus steel 288 layersweight: 149 grammspacer inlay mokume gane, jaspis, carbon fiberlinerlockknife lenght open 20 cmknife closed 12 cmblade lenght 8,5 cmblade thickness: 2,8 mm deliverd with a hand made leather sheath100% handnmade in France
MANU LAPLACE 1515 NEW INUIT CLOUTÉ ebony damascus
Manu Laplace, not just a cutler, but an artist who lives his dream.In 2001 Manu Laplace began to combine tradition, craftsmanship, art and passion and created the legendary 1515® knife.The concept: tied to the Nordic form, in always identical construction, Manu Laplace lets his creative power and creativity flow into an infinite number of unique variations. Each knife is unique and highly recognizable.In the meantime, the artist and his brand 1515® have become a valued brand and a must-have among lovers and collectors worldwide. scales: ebony with 19 pins on each scaleblade: damascus 288 layers, stainlessweight: 111 grammlinerlockresort: insert mammoth ivoryknife lenght open 20 cmknife closed 12 cmblade lenght 8,5 cm deliverd with a hand made leather sheath100% handnmade in France
Marie Taillardat Le 1925 ziricote wood VG 10 Suminagashi damascus
Le 1925 – The debut creation of master bladesmith Marie Taillerdat from Thiers, crafted in homage to her grandfather. The perfectly centered blade is made from 67-layer Suminagashi VG-10 stainless Damascus steel, allowing for an extremely fine and sharp edge thanks to its carbon core. The blade action is smooth and well-balanced. The liners and backspring are mat finished. Overall, the Le 1925 is flawlessly crafted and beautifully refined. handles: ziricote woodhandle 12 cmhandle thickness 11,8 mmTotal length knife 21,5 cmBlade 9 cmBlade steel: VG10 suminagashi stainless steelBlade thickness 2,3 mmBlade height 24,5 mmDelivery including leather case and linnen bag100% handmade in France
Laguiole en Aubrac laguiole knife DSC® damascus ECLIPSE mammoth crust 12 cm
" ECLIPSE" wonderfull 12 cm Laguiole knife, brass plates, resort chiseled by hand, forged resort, full handle scales made from beautiful fossil mammoth ivory crust, very fine guillochage with three small diamonds chiseled bee steel DSC® damascus 120 layers stainless (Markus Balbach Germany)blade 10 cm resort forgedforged beeengraving by hand scales: 12 cm size knife open: 22 cmfinishing: mat linen pouch and description, wooden boxmade in France
Liadou du Vallon® PETIT juniper chiseled plates damascus 10,5 cm
The Liadou ® is an authentic winemaker knife. In the past, every winemaker had one in his pocket. His "Liadou" (Occasional Tying Tool) formerly served to split the willow and "bind" the vine to size in a crown. It was also used for snacks or housework. Its typical, broad, down-facing blade, its flat, firm and jerky spring made it a reliable and durable tool. This is the smaller version with 10,5 cm scales. A perfect knife for the pocket or your bag. scales juniperknife open 19 cmblade rose-damascus stainlessweigt 70 g delivered in a small giftbox and certificat100% made in France
Laguiole en Aubrac double plate knife jap. damascus thuya burl wood 12 cm
12 cm Laguiole knife double plates, resort chiseled by hand, forged resort, scales made from beautifully grained thuya burl wood, VG10 damascus stainless steel HRC60-62 Handle: 12 cmHandle scales: thuya burl woodBlade steel: VG10 damascus stainless HRC60-62bolsters: matBlade length: 10 cm Knife length opened 22 cm Weight 105 grams Resort: spring and bee forged from one pieceDouble plates, chiseled up and downopening with two handsSlipjointSupplied with: description, cloth pouch, certificate from the manufacturer, wooden boxHandcrafted in the Laguiole en Aubrac forge in France/EspalionAll operations are carried out by a knife maker
Coutellerie du Lotus Cornicciolu Desert warthog Ivory corsican shepherd's knife damascus
Corsican Cornicciolu made by hand In the village of Levie, in the heart of the Alta Rocca in South Corsica, Jean-François TRAMONI traditional Corsican shepherd's knives.The handle of the Cornicciolu is made from Desert warthog Ivory. The handforged blade is made of twisted damascus steel. The non-stainless blade steel is finely and sharply ground. Founded in Corsica over 35 years ago, Coutellerie du Lotus designs and manufactures its pieces in a constant quest for quality and respect for the traditions of artisan forging. The materials used are selected and crafted by the owners themselves. Handle: 12 cm Desert warthog IvoryBlade: damascus non-stainless, 300 layersblade length 8,5 cmBlade thickness 3.3 mmKnife opened: 21 cmweight: 127 g Frictionfolder no lock
Coutellerie du Lotus Cornicciolu ram horn corsican shepherd's knife twisted damascus
Corsican Cornicciolu made by hand In the village of Levie, in the heart of the Alta Rocca in South Corsica, Jean-François TRAMONI traditional Corsican shepherd's knives.The handle of the Cornicciolu is made from a piece of ram's horn into which the seat of the blade is sawn. The handforged blade is made of twisted damascus steel. The non-stainless blade steel is finely and sharply ground. Founded in Corsica over 35 years ago, Coutellerie du Lotus designs and manufactures its pieces in a constant quest for quality and respect for the traditions of artisan forging. The materials used are selected and crafted by the owners themselves. Handle: 13 cm ram horn Blade: damascus non-stainless, 300 layersblade length 10 cmBlade thickness 3.4 mmKnife opened: 23 cmweight: 125 g Frictionfolder no lock
Coutellerie du Lotus Cornicciolu Desert warthog Ivory corsican shepherd's knife damascus
Corsican Cornicciolu made by hand In the village of Levie, in the heart of the Alta Rocca in South Corsica, Jean-François TRAMONI traditional Corsican shepherd's knives.The handle of the Cornicciolu is made from Desert warthog Ivory. The handforged blade is made of explosion damascus steel. The non-stainless blade steel is finely and sharply ground. Founded in Corsica over 35 years ago, Coutellerie du Lotus designs and manufactures its pieces in a constant quest for quality and respect for the traditions of artisan forging. The materials used are selected and crafted by the owners themselves. Handle: 12 cm Desert warthog IvoryBlade: damascus non-stainless, 300 layersblade length 8,5 cmBlade thickness 3.3 mmKnife opened: 21 cmweight: 127 g Frictionfolder no lock
Coutellerie du Lotus Cornicciolu Desert warthog Ivory corsican shepherd's knife damascus
Corsican Cornicciolu made by hand In the village of Levie, in the heart of the Alta Rocca in South Corsica, Jean-François TRAMONI traditional Corsican shepherd's knives.The handle of the Cornicciolu is made from a piece of Desert warthog Ivory. The handforged blade is made of twisted damascus steel. The non-stainless blade steel is finely and sharply ground. Founded in Corsica over 35 years ago, Coutellerie du Lotus designs and manufactures its pieces in a constant quest for quality and respect for the traditions of artisan forging. The materials used are selected and crafted by the owners themselves. Handle: 11,5 cm Desert warthog IvoryBlade: Carbon damascus 120 layersblade length 10 cmBlade thickness 3.3 mmKnife opened: 22 cmweight: 151 g Frictionfolder no lock
Coutellerie du Lotus warthog ivory damascus blade
unique piece made by hand - warthog ivory handforged twisted damascus blade and bolsters In the village of Levie, in the heart of the Alta Rocca in South Corsica, Jean-François TRAMONI makes traditional Corsican shepherd's knives. But he also create his own knives.Founded in Corsica over 35 years ago, Coutellerie du Lotus designs and manufactures its pieces in a constant quest for quality and respect for the traditions of artisan forging. The materials used are selected and crafted by the owners themselves. Handle: warthog ivory 11 cmBlade: twisted damascus non-stainlessblade length 8,5 cmBlade thickness 2.9 mmKnife opened: 19,5 cmweight: 204 g slipjoint
Coutellerie du Lotus carbonfiber damascus blade 11 cm
unique piece made by hand - carbonfiber handforged explosion damascus blade and bolsters In the village of Levie, in the heart of the Alta Rocca in South Corsica, Jean-François TRAMONI makes traditional Corsican shepherd's knives. But he also create his own knives.Founded in Corsica over 35 years ago, Coutellerie du Lotus designs and manufactures its pieces in a constant quest for quality and respect for the traditions of artisan forging. The materials used are selected and crafted by the owners themselves. Handle: cabonfiber 11 cmBlade: twisted damascus non-stainlessblade length 8,5 cmBlade thickness 2.9 mmKnife opened: 19,5 cmweight: 175 g slipjoint
Robert Klaas Flaschen-Erl mammoth molar stainless damascus blade
Handcrafted in Solingen – ‘Flaschen-Erl’ pocket knife with handle scales made from mammoth molar and a stainless Balbach Damascus bladeIn the 1950s, Robert Klaas created the ‘Flaschen-Erl’ design, inspired by a bottle of brown fizzy drink that had been invented 70 years earlier and had gained worldwide fame. The 2022 annual knife is based on an ink drawing from the Klaas sample book that is at least 60 years old.The handle scales are crafted from a fossilised mammoth molar, approximately 10,000 years old, sourced from the Siberian permafrost. The knife features matt nickel silver bolsters and brass plates. The Damascus blade made from DSC® inox superclean (stainless) with a rose Damascus pattern is a real eye-catcher. The Damascus blade from Markus Balbach has 640 layers, a very fine steel structure and high edge retention (HRC62).The thumb stud allows the delicate slip-joint knife to be opened with ease.Handle: 9.5 cm stabilized mammoth toothBrass platesnickel silver jaws polishedSteel: Balbach DSC® inox stainless rose damascus 640 layers pattern HRC 62blade: 7,5 cmknife opened 17 cmweight 84 gram
MANU LAPLACE 1515 cep de vigne damascusblade
Manu Laplace, not just a cutler, but an artist who lives his dream.In 2001 Manu Laplace began to combine tradition, craftsmanship, art and passion and created the legendary 1515® knife.The concept: tied to the Nordic form, in always identical construction, Manu Laplace lets his creative power and creativity flow into an infinite number of unique variations. Each knife is unique and highly recognizable.In the meantime, the artist and his brand 1515® have become a valued brand and a must-have among lovers and collectors worldwide. scales: Cep de vigne 100 years old with bolstersblade: suminagashi damascus stainless 66 layers weight: 145 grammlinerlockspacer with inlayknife lenght open 20 cmknife closed 12 cmblade lenght 8,5 cm delivered with a hand made leather sheath, certificate, paper box100% handmade in France
Robert Klaas Stockman knife poplar burl wood blue damascus
A classic ‘Stockman’ knife from Robert Klaas. The handle scales of this fine slip-joint knife are crafted from vividly textured, stabilised poplar burl wood. The knife features matt nickel silver liners and brass plates.The eye-catching feature is undoubtedly the fine blade made from DSC® inox, super-clean Damascus steel from Markus Balbach. The ‘Ferus’ Damascus steel has 120 layers and a hardness of HRC 62.The stainless steel has a very fine grain, is rust-resistant and suitable for contact with food.stockman kife scales stabilised poplar burl wood 10,5 cmbrass platesblade 8,5 cm DSC® inox damascus Ferus Markus Balbach HRC62 120 layersknife open 18,5 cmweight 55ghandmade in Solingen
Fontenille Pataud Le LOMBARD thuya burlwood stainless Vinland damascus
Le Lombard – A Knife of Tradition and Elegance The Le Lombard draws inspiration from traditional French knife shapes such as the Yssingeaux or Sauveterre. Yet this first design by Adrien Giovaninetti, created in 2016, possesses a distinctive and unique character of its own. After deciding to step away from knifemaking and devote himself entirely to composing his oratorio, production of the Le Lombard was entrusted to the renowned cutlery workshop Fontenille Pataud. Each knife is meticulously handcrafted. Slim and refined, the Le Lombard sits comfortably and securely in the hand.handles: thuya burlwoodhandle 11,5 cmTotal length knife 20,5 cmBlade 9 cmBlade steel: Damasteel damascus stainless Vinland 100 layers - HRC 62Blade thickness 2,5 mmBlade height 19,4 mmweight 80 gramm Delivery including leather case 100% handmade in France
Benjamin Hée Liner-Lock knife ironwood Achim Wirtz damascus 12 cm
Benjamin Hée is a French artisan and cutler who has been handcrafting knives since 2018. Having started out with chef’s knives, he now specialises in elegant folding knives, particularly precision-crafted liner-lock models. His knives are distinguished above all by their fine craftsmanship and a pleasantly smooth blade action. The liner-lock knives can be opened comfortably with one hand.This unique model features a ‘Basket Rose’ Damascus blade from Achim Wirtz. The masterpiece is perfected by the scales, which are crafted from hand-forged mosaic Damascus steel.The liners are made of titanium, whilst finely grained desert ironwood has been used for the handle scales.Each piece is a unique creation, combining traditional blacksmithing with modern design.Handle scales: desert ironwoodHandle length: 12 cmHandle thickness: 17.2 mmTotal knife length: 21.5 cmBlade length: 9.5 cmBlade steel: damascus steel Achim WirtzBolsters: Mosaic Damascus Benjamin HéeBlade thickness: 3.2 mmBlade height: 23.3 mmWeight: 160 gceramique detent ball one hand opening inclusive leather case, handmade in France
Benjamin Hée Liner-Lock knife walnut burl wood Achim Wirtz damascus 12 cm
Benjamin Heé is a French artisan and cutler who has been handcrafting knives since 2018. Having started out with chef’s knives, he now specialises in elegant folding knives, particularly precision-crafted liner-lock models. His knives are distinguished above all by their fine craftsmanship and a pleasantly smooth blade action. The liner-lock knives can be opened comfortably with one hand.This unique model features a Damascus blade from Achim Wirtz. The masterpiece is perfected by the scales, which are crafted from explosion-forged Damascus steel.The liners are made of titanium, whilst stabilised walnut burl wood has been used for the handle scales.Each piece is a unique creation, combining traditional blacksmithing with modern design.Handle scales: stabilised walnut burl woodHandle length: 12 cmHandle thickness: 17.2 mmTotal knife length: 21.5 cmBlade length: 9.5 cmBlade steel: damascus steel Achim WirtzBolsters: explosion-forged damascus (Florian Keller)Blade thickness: 3.2 mmBlade height: 23.3 mmWeight: 130 gceramique detent ball one hand opening inclusive leather case, handmade in France